2019 Ventrac HQ680

Call for Price


Availability
Brochure
Year
2019
Manufacturer
Ventrac
Model
HQ680

Overview

Description

The HQ680 Tough Cut Mower is designed for mowing high grass, thick weeds, and heavy brush. A large baffled front opening helps direct materials into the deck and helps hinder debris from escaping.



Three heavy-duty blades counter rotate to cut and deposit waste evenly without windrowing. Capable of tackling saplings and large thorn bushes, the Tough Cut makes short work out of overgrown thickets.



The Tough Cut can be adjusted to three cutting heights: 3, 3 5/8, and 4 1/4 inches. Easy servicing of belts and pulleys is provided by the hinged and removable cover. The tilt-up deck provides easy access to the blades.

Product Benefits
  • Clear Path: When the attachment does the work first, the tractor drives over a cleared path rather than trampling grass down before cutting. This innovative design helps reduce uneven mowing.
  • Heavy Duty Deck Shell: Heavy duty welded deck can handle the toughest cutting conditions and is built to last for years.
  • Counter Rotating Dual-Sided Blades: Blades spin in opposite directions providing for the better discharge of material. Mower blades are sharp on both sides so they can be used on right or left-hand spindles, allowing for double blade life.
  • Flip-Up Deck: Cleaning the deck and changing blades couldn't be easier with Ventrac's quick flip-up deck design. * HQ680 only
  • Extreme Duty Spindles: Cast iron spindle with 30mm diameter shaft and greaseable bearing.
  • No Shear Pins Needed: Ventrac decks are driven by a belt, not a PTO shaft. If the mower blade should get stuck on an obstacle, the PTO belt will slip rather than having a PTO shaft shear pin break.
  • Ventrac Mount System: With a little practice, you can switch almost any attachment within a minute, without any tools or heavy lifting.
Info
  • Sales Model: HQ680
  • Full Description: HQ, HQ680 Mower, Tough Cut
  • Product Type: Attachment
Category
  • Product Type: Attachment
  • Attachment Type: Mower
  • Front Mount: Ventrac Mount System
  • 4000 Series Mount: Standard
  • Mower Type: Rough
Mower Specs
  • Cutting Width: 68 in.
  • Discharge Type: Rear
  • Flip-Up Deck: Standard - Tilt up deck
  • Cutting Positions: 3
  • Cutting Heights (Standard): 3 in., 3-5/8 in., 4-1/4 in.
  • Cutting Height Range with Optional S: 3-1/2 - 7 in. in 1/2 in. (12.7 mm) increments
  • Number of Blades: 3
  • Blade Type: 5/16x2-1/2x 23 in.
  • Deck Construction: Multi-Gauge 5/16 in. (7.9 mm) at spindle mount
  • Deck Suspension: Gauge Wheels, Tractor
Dimensions
  • Length: 45 in.
  • Overall Height: 18 in.
  • Overall Width: 69 in.
  • Weight: 360 lb.
Accessory Options
  • 70.8054: KIT, SWIVEL WHEEL HQ680

Specs

Deck

Deck Size
68 in.
Discharge Type
Rear

Promotions



Related Products